Видео

I'm curious-it looks like that rope is smaller than 11mm which is what the wrench states that it works with at the minimum. My guess is that it can manage 10mm static just fine. What size was your rope?

Ditch that saw and get a silky. For real. Its miles better

Very nice. I've been trying to move past the prussik for years. I have to have a two direction lanyard, because I'm old and not as strong at climbing as you young men. The prussik gets too tight at just the sketchy moment I need to move it on my fifteen foot lanyard. I use the same hooks or very similar to what you have, because they're lighter than the steel ones. If you were to post a video of you using this lanyard to ascend a tree while staying tied in the whole time, that wold be really helpful. I have on order a Klimair Adjuster to solve this, but i really like the way a Distel and pulley moves on my climb line, and I was thinking of having two of those rigs on there, but I wonder about the clutter factor. Thank you for posting this!

Hi bud I am also using RRP with dranline rope and noticed that it's getting flat shaped is it the rope issue or I have too much friction adjustment? I believe i am o middle Mark,,3"

what rigging rope is that ? looks good ,nice video,thx.

Could you attach that xsre biner direct to the chest harness? By swapping the position of the 2 carabiners on your bridge's rigging plate.

Are you still running this kind of bridge plate? I’m using a petzl paw but thinking of getting the notch rook, wonder if you’ve tried it?

Bad ass transition my man

Looks like a really fun job! Just found your channel and subscribed.

You fucking suck, I climb old school dude your slow. The branch came back one cause you didn’t have enough slack in the line to let the first branch drop down. Your a kid lol

Very smooth work. Learned alot. Always enjoy seeing close up what Tree climbers are using as their Technique. Safety every step,and tired from a long Day.

And that 194 sounds angry. What kind of pipe are you running or is it a built saw?

What kind of redirect is that? Does it not add to much friction and when is best time to use it like that? Asking cause I climb zigzag drt and I find myself doing a lot of oak clean outs and dead wooding and get into spots I can't advance out without resetting my whole system.

Great idea haha

Good morning and good job.

Hi, I’m at 31 min in but can’t resist to say few things: - looks like you are rushing a little bit, I follow you I never see you rushing or hurry like this, is that any reason for that? - if you face cut the big branches and direction on the right side you can control better the falls without brushing the house or the other trees branches. If the chainsaw is stocked in to stopping it is a nice and safer, and after freeing out is a good idea to do visual check on there is no significant damage on the blade. Keep up the good work. Just my friendly 2 cents. Erik from Budapest / Hungary 🇭🇺

Why not put the carabiner around your connection part of the rope right to the chest harness connection instead of a prusic

👍👍👍👍

You explain very good on your videos

Let r rip

For years now I've seen you use that yellow rope??? Can you tell me what the benefits of it are why you choose it..and details be great if u could ..looking into a static or different srs style line ..something besides 24 strand 11.7 that I usually run...just got the samson dry vortex but got it for double rope mainly ???

Nicely done!

Nice work

Nice video and good job 🤙🤙

Mint 👌🏽

Are these stable?

If you do your break-off cuts top cut first then bottom cut, your able to leave the saw in the cut and push without any chance of your saw being grabbed and held onto by the piece.

At least you turn tge volume down during cuts..its most annoying thing as tree guy to watch videos of terrible stock 201t s especially some guys saws sound like there guna blow..rather see details and set ups of other workers...god bless

What’s the name of that ?

Nice work. Hey, I bought a Captain Hook. I used it in the top of a 70' codom white pine to transfer stems. I'm 68 and killin it.

Why not clear your shelf on the way up and avoid that birds nest? Especially when you already have a rope set.

Fast forwarding the video makes it totally useless for those of us trying to learn

Good tricks!!👏 Bájalo carajo, se fue bien regañado el amigo jajaja 😁😋

This video just taught me so much. So you’re just using a drt with an adjustable friction saver, and for rigging it’s just a rigging rope you put on a notch on the tree too support for the drop. Good stuff man 📝

You’re a beast

💪💪💪💪

My foot ascender is two caribeners and an Oring! what's ur advice on tht as a new climber

You got it 👍 💪

Nice job! Scared me at 4:04 😮

That's some good work. What kind of saddle are you climbing on

Nice video and good job 👏

I know you're not rocking your rope runner pro in this video just wondering what rope you currently use with your rope runner. Thanks

where do you work?

Isn't that a Elm tree

Do you have a video of how you built it ? Including parts needed

Be so much easier to do on ground and clearer without all the other stuff in the background, with better camera angles

I always thought youd get arested for shaling your device in public 😂

Great review.

🙋 'promosm'

Beast mood